Fibre Optic Cabling > Standard Cable

Product Details:

• Suitable for internal and external use.
  Ducts, aerial installations and direct burial.
  
• Distribution and general purpose cables.
  
• Cable consists of a single tube containing 2 to 24 fibers.
  
• Water blocking gel gives a moisture protection for cable installation in ducts.
  
• When there are more than 12 fibers, they are divided in two groups where a coloured thread identifies each group.
  
• Physical protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube.
  
• LSZH sheath for internal and external use.
  A ripcord is located under the jacket to facilitate jacket removal.
  
• Suitable for occasional flooded ducts.
  
• Polyethylene jacket available.
  
• Small diameter and light weight.
  
• Cost effective.
  
• Wide operating temperature range.
  
• Rodent resistant.
  
• Available in single mode, 50/125um, 62.5/125um and OM3.
  
• Cables tested according to TIA/EIA-455, IEC-60794-1-2 and EN-187000.
  
• Cables ordered with PVC or LSZH jackets meet IEC-60332-1 standard.
• Upon request, cables meeting the IEC-60332-3 can be supplied.
  
• Standard colour black, other colours available upon request.